Tamiya 1:10 R/C MINI COOPER RACING BLUE PB (MB-01) 47515

Description

Tamiya 1:10 R/C MINI COOPER RACING BLUE PB (MB-01) 47515

Tamiya 1:10 R/C MINI COOPER RACING BLUE PB (MB-01) 47515

This is a limited-edition version of the MINI Cooper Racing kit. (item 58747) Unlike the standard kit, this edition includes a pre-painted body in Blue (PS-4) with White (PS-1) roof and Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for beginner and veteran hobbyists.

• Chassis: MB-01 (2WD) with 3 wheelbase options and selectable FWD/RWD configuration (kit set as FWD).
• Body: Pre-painted (Blue/White) polycarbonate with smoke-tinted windows, pre-cut, and pre-drilled.
• Motor/ESC: Includes 540-type brushed motor and Hobbywing ESC.
• Suspension: 4-wheel double wishbone with friction dampers.
• Tires/Wheels: 8-spoke wheels with 60D radial tires.
• Required Items: 2-channel radio, steering servo, 7.2V battery pack, and charger.

1/10 SCALE R/C MINI COOPER RACING (BLUE PAINTED BODY) (MB-01 CHASSIS)

Painted BodyLength: 315 mm. Image shows assembled kit.
Wheel arches are pre-citut and body mount holes made.

MINI trademarks used are licensed by BMW AG.

About 5.3 million units of the Mini were produced from 1959 until 2000 – remarkably without major model changes – and this legendary little car even achieved second place in the Car of the Century award for the best cars of the 20th century. Its front-wheel drive layout was rare for its time, and it featured ergonomic body structure with compact mechanics and maximum interior space, as well as frisky performance. In 1961, the sporty Mini Cooper joined the line-up and with great racing success, the car gained even greater popularity around the world. This assembly kit creates a radio control model assembly kit depicting the car, with a polycarbonate body pre-painted in blue with a white roof. Stickers are included for the bonnet stripes, body-side pinstripes and racing numbers. 8-spoke wheels are paired with 60D radial tires.

The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a front-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

Specifications
★Length: 315mm, width: 167mm, height: 140mm ★Wheelbase: 210mm (Short) ★Tread: 140mm (front & rear) ★Tire width/diameter: 25/59mm (front and rear) ★Bathtub type chassis ★Front-wheel drive ★4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers ★Gear ratio = 5.83:1 (using kit 29T pinion & 65T spur) ★Type 540 motor ★ESC included for export.

Separately Required Items

★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

The instantly recognizable Mini form is recreated by a polycarbonate body pre-painted in blue and white.

The front Mk-II grille and rounded headlights are accurately depicted.

Stickers are used for white stripes, racing numbers, bonnet pin and more.

The bumperless rear features depictions of rectangular taillamps and the large rear windshield.

8-spoke wheels are paired with treaded 60D radial tires.

The compact MB-01 chassis. For this model, it is assembled with a short wheelbase: 210mm.

The model features a three-piece steering tie-rod setup with the servo in the front-left.

The four-wheel double wishbone suspension uses symmetrical arms.

The motor resides in the front-right, with power going to the wheels via propeller shaft and the front differential.

The motor mount is assembled as a unit, and secured to the chassis using two screws.

The 4-bevel gear differential is the same as that on the TT-02; this chassis is compatible with TT-02 Hop-Up Option differentials.

The flip-up battery holder gives quick access.

The Mini Cooper Racing uses a 210mm wheelbase. Change sub-deck and lower deck attachment positions to alter the chassis wheelbase.

A close-up on the coil sprung dampers on the rear suspension.

This versatile chassis can be assembled into three wheelbases and two drivetrain layouts.

The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.

• 1/10 scale R/C model assembly kit. Length: 435mm, width: 194mm, height: 121mm. Wheelbase: 257mm.
• Durable 1.0mm thick polycarbonate body authentically captures the form of the 1998 Honda NSX Racing.
• The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
• Gun metal 6-spoke wheels are paired with racing slick tires.
• Comes with trim stickers and window masking stickers for use in the paint job.
• Includes ESC and 540-Type brushed motor.
• Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

SPECIFICATIONS

• Adjustable Gear Ratio Yes
• Bearings Plastic bushing
• Body Material Polycarbonate
• Body Stickers Included
• Chassis Material ABS Plastic
• Chassis Type TT-02
• Construction Type Assembly Kit
• Differential Type Gear
• Drive Type 4WD
• Motor 540-brushed type
• Scale 1/10
• Shock Damper Friction type
• Suspension Fully Independent Double Wishbone
• Terrain Use On-Road

Model #47515

Additional information